Siemens Sinamics s120 Commissioning Manual page 79

Table 2- 20 Switch-in/switch-out status signal
Signal name
Ready for switching on
Ready for operation
Operation enabled
Closing lockout active
Pulses enabled
only available in Interface Mode p2038 = 0
1)
Function diagrams (see SINAMICS S120/S150 List Manual)
• 2610
• 2634
• 8732
• 8832
• 8932
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
Internal status word
ZSWA.00
ZSWAE.00
ZSWA.01
ZSWAE.01
ZSWA.02
ZSWAE.02
ZSWA.06
ZSWAE.06
ZSWA.11
Sequence control - control unit
Sequence control - missing enable signals, line contactor control, logic
operation
Basic Infeed - control unit
Smart Infeed - control unit
Active Infeed - control unit
2.8 Powering-up/powering-down the drive system
Parameter
r0899.0
r0899.1
r0899.2
r0899.6
r0899.11
Preparation for commissioning
PROFIdrive/Siemens
telegram 1 ... 352
ZSW1.0
ZSW1.1
ZSW1.2
ZSW1.6
ZSW2.10
1)
79