Terminal Module Tm54F - Siemens Sinamics s120 Commissioning Manual

4.1.4.6

Terminal Module TM54F

Table 4- 51 Meaning of the LEDs on the Terminal Module TM54F
LED Color
READY -
Green
Orange
Red
Green/red
Green / orange
or
Red / orange
L1+, L2+ –
Red
L3+ –
Red
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
Status
Off The electronics power supply is missing or outside the
permissible tolerance range.
Continuous The component is ready for operation, cyclic DRIVE-
light CLiQ communication is taking place.
Continuous DRIVE-CLiQ communication is being established.
light
Continuous This component has at least one fault.
light Remark:
The LED is activated irrespective of whether the corre-
sponding messages have been reconfigured.
Flashing light Firmware is being downloaded.
0.5 Hz
Flashing light 2 Firmware download is complete. Wait for POWER ON.
Hz
Flashing light 1 Component recognition via LED is activated
Hz (p0154 = 1).
Remark:
Both options depend on the LED status when compo-
nent recognition is activated.
Green / orange: Component is operating without any
faults
Red/orange: Component signals a fault
Off The controllable sensor power supply is functioning
fault-free.
Continuous There is a fault in the controllable sensor power supply.
light
Off The sensor power supply is operating fault-free.
Continuous The sensor power supply has a fault.
light
Description, cause
Diagnostics
4.1 Diagnostics via LEDs
Remedy
–
–
–
Remedy and
acknowledge
fault or safely
acknowledge
the fault
–
Carry out a
POWER ON
–
–
–
339