Overview Of Important Parameters - Siemens Sinamics s120 Commissioning Manual

2.5.3.6

Overview of important parameters

Overview of important parameters (see SINAMICS S120/S150 List Manual)
• p0009
• p0092
• p0097
• r0110[0...2]
• p0112
• p0113
• r0114[0...9]
• p0115[0...6]
• r0116[0...1]
• p0118
• p0340[0...n]
• p0799[0...2]
• p1082[0...n]
• p1800[0...n]
• p4099
• r9780
• r9880
• r9976[0...7]
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
2.5 System rules, sampling times and DRIVE-CLiQ wiring
Device commissioning parameter filter
Isochronous mode, pre-assignment/check
Select drive object type
Basic sampling times
Sampling times pre-setting p0115
Pulse frequency minimum selection
Pulse frequency minimum recommended
Sampling times for internal control loops
Drive object cycle recommended
Current controller computing dead time
Automatic calculation of motor/control parameters
CU inputs/outputs, sampling time
Maximum velocity
Pulse frequency setpoint
Inputs/outputs sampling time
SI monitoring cycle (Control Unit)
SI monitoring cycle (Motor Module)
System utilization
Preparation for commissioning
47