Voip Interfaces For Combined Application Types - AudioCodes Mediant 3000 User Manual

User's Manual
2. VLANs are required and the Native VLAN ID is the same VLAN ID as the
Management interface (configured for Index 0):
•
'VLAN Mode' is set to Enable.
•
'Native VLAN ID' field is set to "1".
3. IP Routing table: A routing rule is required to allow remote management from a host
in 176.85.49.0 / 24:
Destination IP
Address
176.85.49.0
4. All other parameters are set to their respective default values. The NTP application
remains with its default application types.

11.3.4.3 VoIP Interfaces for Combined Application Types

This example describes the configuration of multiple interfaces for the following
applications:

One interface for the OAMP application.

Interfaces for Call Control and Media applications, where two of them are IPv4
interfaces and one is an IPv6 interface.
1. Multiple Interface table:
Example of VoIP Interfaces of Combined Application Types in Multiple Interface Table
Application
Index
Type
0 OAMP
1 Media &
Control
2 Media &
Control
3 Media &
Control
2. VLANs are required and the Native VLAN ID is the same VLAN ID as the
Management interface (index 0):
•
'VLAN Mode' is set to Enable.
•
'Native VLAN ID' field is set to "1".
3. IP Routing table: A routing rule is required to allow remote management from a host
in 176.85.49.0/24:
Version 6.6
Example IP Routing Table
Prefix Length
24
Interface
IP Address
Mode
IPv4 192.168.85.14
Manual
IPv4 200.200.85.14
Manual
IPv4 200.200.86.14
Manual
IPv6 2000::1:200:2
Manual 00:86:14
Gateway IP
Address
192.168.0.1
Prefix
Gateway
Length
16 192.168.0.1
24 200.200.85.1
24 200.200.86.1
64 ::
125
11. Network
Interface
Metric
Name
1 -
VLAN Interface
ID Name
1 Mgmt
201 MediaCntrl1
202 MediaCntrl2
202 V6CntrlMedia
2
Mediant 3000