Voip Interface Per Application Type; Voip Interfaces For Combined Application Types - AudioCodes Mediant 800B User Manual

Analog & digital voip media gateway

Hide thumbs Also See for Mediant 800B:

Table of Contents

12.4.3.2 VoIP Interface per Application Type

This example describes the configuration of three VoIP interfaces; one for each application

Interface table: Configured with three interfaces, each for a different application type,

i.e., one for OAMP, one for Call Control, and one for RTP Media, and each with a

different VLAN ID and default gateway:

Table 12-7: Example of VoIP Interfaces per Application Type in Interface Table

Static Route table: A routing rule is required to allow remote management from a

host in 176.85.49.0 / 24:

All other parameters are set to their respective default values. The NTP application

remains with its default application types.

This example describes the configuration of multiple interfaces for the following

applications:

One interface for the OAMP application.

Interfaces for Call Control and Media applications, where two of them are IPv4

interfaces and one is an IPv6 interface.

Interface table:

Table 12-9: Example of VoIP Interfaces of Combined Application Types in Interface Table

User's Manual

200.200.85.14

211.211.85.14

Table 12-8: Example Static Route Table

200.200.85.14

200.200.86.14

2000::1:200:200:86:1

Mediant 800B Gateway and E-SBC

200.200.85.1

211.211.85.1

Prefix Length

ManagementIF

192.168.11.1

V6CntrlMedia

Document #: LTRT-10278

Show Quick Links

Table of Contents