Transfer Of Screen Data - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
8.2

Transfer of screen data

Pay rigid attention to the cautions below when screen data created in FX-PCS-DU/WIN-E is
read/written using GT-Designer or when screen data created in GT-Designer is read/written
using FX-PCS-DU/WIN-E.
If unavailable settings are contained in the screen data, an alarm message is displayed when
the screen data is read. In such a case, check the contents of the screen data.
FX-PCS-DU/WIN-E
1) Screen data
• Read/write of the functions dedicated to FX-PCS-DU/WIN-E (Refer to Paragraph 8.1.1.)
a) FX-PCS-DU/WIN-E:
No problems are expected in both read and write.
b) GT-Designer:
If the GOT has dedicated functions, such functions are not read.
• Setting of display screen changeover (Refer to Paragraph 8.1.2.)
a) FX-PCS-DU/WIN-E:
Names and contents of the functions are automatically converted into those used in the
software.
b) GT-Designer:
Names and contents of the functions are automatically converted into those used in the
software.
• Functions dedicated to GT-Designer (Refer to Paragraph 8.1.3.)
a) FX-PCS-DU/WIN-E:
These functions cannot be set in the GOT. (That is, these functions cannot be read nor
written.)
b) GT-Designer:
These functions cannot be set in the GOT. (That is, these functions cannot be read or
written.)
a)
F900GOT
b)
GT Disigner
Creation of Display Screens 8
8-8