Mitsubishi Electric F930GOT-BWD Operation Manual page 313

Graphic Operation Terminal GOT-F900
3) Shift
• When the number of digits to be displayed is smaller than the specified total number of
digits, the numeric is automatically shifted to the right, the center or the left in accordance
with its setting.
Example:
When the specified total number of digits is set to 9 and the displayed numeric is a 3-digit
value
Right :
Center :
Left :
4) Gain 1, gain 2 and offset
The value obtained by the calculation "(Monitor value x Gain 1 / Gain 2) + Offset" is
displayed.
Example:
When the monitor value is 1000 (current value of D100), gain 1 is set to 10, gain 2 is set to
2 and the offset is set to 3
(1000 × 10 ÷ 2) + 3 à "5003" is displayed.
5) User ID
An ID can be assigned to the numerical input function.
When device data specified by the "Numerical Input" object is changed (by pressing the
ENT key), ID No. is stored in the write device "DO+3" in the system information. By
checking this ID No., the changed "Numerical Input" object can be detected.
Make sure to assign an ID different from other numerical inputs ID's.
Destination ID
This attribute allows to specify the change order of "Numerical Input" objects.
Start point
1 2 3
1 2 3
Creation of Display Screen (GT Designer) 20
1 2 3
20-39