Sample Cond - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
11.2.1

SAMPLE COND.

Set the timing at which sampling is performed. When the sampling condition set here is
satisfied, a specified data register is accessed and its data is stored.
The sampling condition, trigger (DEVICE) or constant cycle (CYCLIC) can be selected.
• Sampling by trigger
When X, Y, M, S, T or C becomes ON (OFF à ON)
sampling is performed. (D, Z and V cannot be specified.)
• Sampling in constant cycle
A cycle (time interval) can be set within the range of 1 second to 10 days, 23 hours, 59
minutes and 59 seconds. Sampling is performed at the specified time interval.
u u u u Basic operation
SET CONDITION
screen is displayed.
1) SET
Display the
device input
keyboard.
SET
2)
Display the
ten-key pad.
Screen 1
[ SET CONDITION ]
SAMPLE COND.
DEVICE
SET
SAMPLE COND.
Select "SAMPLE
COND.".
Device symbol
Select a bit device among X, Y, M, S, T and C.
0 to 9 ENT
Set date, hour, minute and
second. Set date, hour,
minute and second.
END
M 0 OFF->ON
They are changed over alternately.
DEVICE CYCLIC
Select "DEVICE". Select "CYCLIC".
Screen 1 is Screen 2 is
displayed. displayed.
1) Sampling by trigger 2) Sampling in constant cycle
Device No. ENT
Execute
the input.
Screen 2
[ SET CONDITION ]
SAMPLE COND.
CYCLIC
SET 0d 0h 0m 0s
Sampling Mode 11
or OFF (ON à OFF)
OFF -> ON
Change over
"OFF -> ON" and
"ON -> OFF".
END
11-5
,