Functions Of Connectors - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
4.3

Functions of connectors

A PLC and peripheral devices are connected to the following connectors of the GOT.
F930GOT
1) Port for PLC (RS-422 connector) D-sub, 9-pin, female
- Used for RS-422 connection to a PLC.
- Also used to connect two or more GOT units (RS-422 connection).
2) Port for PC (RS-232C connector) D-sub, 9-pin, male
- For connection to PC when transferring screen data created by the screen creation
software.
- Used for RS-232C connection to a PLC or microcomputer board.
- Also used to connect two or more GOT units (RS-232C connection) or for
communication with bar code reader or printer.
- 2-port interface function can be used. (A PC on which the ladder support software has
been started can be connected.)
3) Port for PLC (RS-232C connector) D-sub, 9-pin, male
- Used for RS-232C connection to a PLC or microcomputer board.
- Also used to connect two or more GOT units (RS-232C connection) or for
communication with a bar code reader or printer.
4) Port for PC (F940WGOT) (RS-232C connector) D-sub, 9-pin, male
- For connection to PC when transferring screen data created by the screen creation
software.
- Not used for connection to a PLC.
- When the GOT is connected to a PLC through Port 3) (RS-232C), it can be used to
connect two or more GOT units (RS-232C connection) or for communication with a bar
code reader or printer.
- 2-port interface function can be used. (A PC on which the ladder support software has
been started can be connected.)
F940GOT
1 ) 2 )
F943GOT
2 )
1 )
Part names 4
F940WGOT
4 )
3 )
4-2
4 )
3 )
1 )