Mitsubishi Electric F930GOT-BWD Operation Manual page 108

Graphic Operation Terminal GOT-F900
3) Data changing
It is possible to notify the PLC that a numeric or ASCII is being changed.
This makes it possible to forbid using numeric value or ASCII data as operation data for the
PLC while data changing is being performed.
This function is available for the following versions or later.
Applicable version
GOT
Product model name
F930GOT
F940, F943GOT
F940WGOT
• System information b8 of write device D(¡+4)
¡ indicates the head write device No.
* For the system information, refer to 8.7.
Example: When D20 is assigned.
M800 (ON during RUN)
M108
* "Data being entered" means that the cursor is on the displayed numeric value or ASCII
input.
Version
V4.00 or later
V6.00 or later
V1.00 or later
MOV D24 K3M100
D24 → Transferred to M100 to M111
M108: ON Data being entered
M108: OFF Data not being entered
Screen mode 9
9-18