Data Transfer - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
14.3

DATA TRANSFER

The screen data, sampling data and alarm history can be transferred (read/written) between
the GOT and a peripheral unit for screen creation (personal computer).
u u u u Basic operation
• By the following operation, the DATA TRANSFER screen is displayed.
The following screen is displayed also without regard to the screen displayed at that time
when screen data is transferred from a personal computer to the GOT. When transfer is
finished, screen No. 0 is displayed when FX-PCS-DU/WIN-E is used or screen No. 1 is
displayed when GT Designer is used.
OTHER MODE
screen is displayed.
Paragraph 7.3
[ DATA TRANSFER ]
[ DATA TRANSFER ]
GOT <--> PC
n n n n Important point
1) Data transfer to personal computer during sampling
Have in mind the following contents when transferring the data from/to a personal
computer while sampling is performed.
- PC à GOT
- PC ß GOT
- PC ßà GOT : Sampling is continued, and the acquired sampling data is saved in
DATA TRANSFER
Select "DATA
TRANSFER".
END
WAITING
: Sampling currently performed is aborted.
The sampling data acquired so far is saved.
: Sampling is continued, and the acquired sampling data is saved.
the same way as "PC ßà GOT".
DATA TRANSFER
screen is displayed.
The screen shown below
is displayed.
Other Mode 14
14-3