18.5.16 Ascii - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900

18.5.16 Ascii

The "Ascii" object displays characters corresponding to specified word devices (T, C, D, V or
Z). Arbitrary characters can be displayed on one base screen.
u u u u Contents of setting
Attribute
Position
Bg and Text
Character Size
Word Device
Data Length
Data Changeable Set whether or not the data can be changed using keys.
User ID
Destination ID
Frame
Frame Color
Alphabets, numerics, etc. which can be specified using ASCII codes.
u u u u How to specify character codes
• Reading the ASCII table
This section describes how to read ASCII using the Appendix as an example.
One ASCII character is displayed by combining both the vertical and horizontal axes.
Example Select "A" Horizontal axis H40 Vertical axis 1 à ASCII H41 (hexadecimal expression)
Heigher
Lower
Bit
0
1
2
3
Enter the X and Y coordinates in the unit of dot.
Enter the background color and display color. (Initial values: White
and black)
Enter the width (W) and the height (H) of characters. Available sizes
are × 0.5, × 1, × 2, × 3 and × 4.
Enter the head of word devices storing character codes to be
displayed.
1 word (16 bits) corresponds to two half-width characters.
Up to 20 words (= 40 characters) can be displayed.
*1 Consecutive devices only can be specified.
*2 Both of high-speed counters C200 to C255 occupy 32 bits each,
and are regarded as 2 words.
The text length shall be up to 20 words.
These IDs are effective when "Data Changeable" is made effective.
An object to be displayed next when a cursor control key is pressed.
Select the frame displayed around the characters. (Initial setting: No
frame)
Enter the frame color. The area inside the frame is filled with the
background color.
Select "b" Horizontal axis H60 Vertical axis 2 à ASCII H62 (hexadecimal expression)
1 2
Bit
(SP)
!
"
#
Creation of Display Screens (FX-PCS-DU/WIN-E) 18
Contents of setting
.....The vertical axis shows the last digit of the code.
3 4 5
0 @ P
1 A Q
2 B R
3 C S
Refer to
Paragraph
3.3.
6 7
@ p
a q
b r
c s
18-38