Function; Function List - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
6.

Function

6.1

Function list

The functions of the GOT are divided into 6 modes. The operator can use each function by
selecting the corresponding mode.
Mode
Character
display
Drawing
Lamp display
Graphic display
Data display
Screen
Data change
mode
function
Switch function
Screen
changeover
Data batch
transfer
Security
function
Program (list)
Parameter
BFM monitor
HPP
mode
Device monitor
1)
Current value/
set value
change
2)
Function
• Alphanumerics are displayed.
• Straight lines, circles and rectangles are displayed.
• The color of a specified area on the screen is inverted in
accordance with the ON/OFF status of the bit devices in
the PLC.
• Set values and current values of the word devices in the
PLC can be displayed in the form of bar graph, line graph
or panel meter.
• Set values and current values of the word devices in the
PLC can be displayed in the form of numeric.
• Current values and set values of the word devices are the
PLC can be changed.
• The ON/OFF status of bit devices in the PLC are
controlled.
• Controll can be in the format of momentary, alternate or
set/reset.
• The display screen can be changed over. The PLC or
touch key can be used to change over the display screen.
• Data saved in the GOT can be transferred to the PLC.
• Screens are displayed only when the proper password is
entered. (This function is available also in the system
screens.)
• Programs can be read/written/monitored in instruction list
program format.
• Parameters for the program capacity, memory latch range,
etc. can be read/written.
• Buffer memories (BFM) in special blocks for the FX
FX
2NC
changed.
• The ON/OFF status of bit devices as well as current values
and set values of word devices can be monitored using
device Nos. and comment expression.
• Current values and set values of word devices can be
changed using device Nos. and comment expression.
Outline of function
Series can be monitored, and their set values
Function 6
Reference
sections
9
18
20
7
/
2N
10
6-1