The Writing Function Of The Initial Display Screen Number (Gt Designer Is Used) - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
8.6.1

The writing function of the initial display screen number (GT Designer is used).

When the GOT is turned ON, user screen 1 will be displayed.
To display this screen, the GOT writes '1' in the data register assigned in GT Designer for
'programmable controller screen change on power ON'
The user can set a different screen to be displayed at power ON, in this location.
Applicable version
GOT
Product type name
F930GOT
F940, F943GOT
F940WGOT
Screen creation software
Product type name
GT Designer
FX-PCS-DU/WIN-E
• Set method
4) Additionaly, "Assistance set" of "System requirements setting" is selected.
5) "Write" or "Do not write" is selected.
An initial value is "Write".
Write
Do not Write : Mode not to write "1" is registered for screen change when power supply
SW5D5C-GOTR-PACK or later
Not supported.
: Mode to write "1" in registered for screen change when power supply is
turned ON.
is turned ON.
version
V4.00
V5.00
V1.00
version
Creation of Display Screens 8
8-16