Alarm History Display Function - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
20.5.5

Alarm history display function

When an alarm device set in the screen creation software becomes ON, a message
corresponding to the alarm device as well as the date and time at which the alarm device
became ON are displayed on a user screen. The date and time at which the alarm device
became OFF can be also displayed.
u u u u Contents of setting
Common setting: Equivalent to the setting displayed in the alarm mode described in Section 6
Display setting : Number of display lines (of alarm history), sort (from the oldest one/from the
Display format : Title (which may be changed)
u u u u Display example
Number of
display lines: 3
Date when the alarm
device turns ON
Time when the alarm
device turns ON
• In the case of monochrome display GOT's, characters in each object of the alarm history
display and alarm list display is displayed in black (characters in the cursor line is displayed
in white).
Because the initial value of the screen color of GT Designer is black, only one line in which
the cursor is located is legible.
When using these objects in GOT, use "Rectangle" etc. and make the background white.
(In the case of GT Designer of SW3D5C-GOTR-PACK C version or later, the screen
background color can be changed.)
Basic setting: Figure (with a frame), frame color, color inside frame and title
color.
latest one), character size and recovery column (whether or not the recovery
column is to be displayed)
Width (display size in the horizontal direction: full-width x width)
Color (The display color and title color are set in basic setting.)
Contents (Date, time and characters can be specified.)
Characters (to be displayed when characters are selected as contents)
OCCURRED
Title
98/12/25 15:00:00
98/12/26 14:30:00
98/12/26 16:40:00
Creation of Display Screen (GT Designer) 20
MESSAGE REST
MOTOR 1 STOP 16:00
MOTOR 1 STOP 15:00
MOTOR 1 STOP 17:00
Display frame
Time when the alarm device
turns OFF
Comment created in "Create
Comment" in the screen
creation software
20-18