Upgrading Of Security Function - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
7.4.1

Upgrading of security function

The following functions have been added to the security function, making the system easier to
use.
Applicable version
GOT
Product model name
F930GOT
F940, F943GOT
F940WGOT
Screen creation software
Software name
GT Designer
FX-PCS-DU/WIN-E
1) Function to display error messages at entry code input
Previously no error message was displayed at the time of incorrect entry code input or
switching to protected screens.
Now it is possible to produce an error display by making setting as shown below.
• Setting for GT-Designer (SW5D5C-GOTR-PACK)
1) The following window can be displayed by using "Common" → "Password".
When it is checked, the level
device setting is enabled.
(See (2) in the next page.)
When it is checked, an error
message is displayed at the
time of incorrect entry code
input.
• Entry code input and contents of error message
Password is incorrect.
This operation is not permitted.
SW1D5C-GOTR-PACK V5.05F
Error message
Version
V4.00
V6.00
V1.00
Applicable version
V2.00
When the entered entry code is incorrect
(Enter the correct entry code.)
When switching to a high-security-level screen is
attempted
(It is necessary to enter the entry code.)
Start up 7
7-13