Screen Changeover By Touch Key; Changeover Using A Fixed Value - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
21.4

Screen changeover by touch key

To change over the display screen using a touch key provided on the screen, two methods are
available. In fixed value method, the No. of a screen to be displayed next can be directly
entered. In upper hierarchy method, the previously displayed screen is displayed next.
Touch key
• Only one method (fixed value or upper hierarchy) can be assigned to one touch key. (A
function other than the screen changeover such as the bit ON/OFF function can be
assigned to a touch key to which either the fixed value method or the upper hierarchy
method has been assigned.)
• Touch keys can be set for each screen.
21.4.1

Changeover using a fixed value

When a touch key is pressed, the set screen is displayed.
Touch key (fixed value):Enter one among the following screen Nos.
Example of screen changeover using touch keys
Screen No. 1 : Menu screen
Touch
* SETTING MENU *
key
ST. 1
No.0 NUMBER OF MANUFACTURE
ST. 2
No.1 PROCESSING TIME
No.2 ST. 3 SCREW TIGHTENING NUMBER
ST. 1
To screen To screen
No. 2
Screen No. 1
* STATION 1 (1/2) *
NUMBER OF TARGETS
NEXT
NEXT
NEXT
To screen
No.6
Fixed value
Upper hierarchy :Returns to the previous screen.
Screen Nos. 1 to 500 (user screen)
Screen Nos. 1001 to 1030 (system screen): Refer to the appendix.
ST. 2 ST. 3
To screen
No. 3 No.4
100
MENU
MENU
To screen
No.1
Changeover of Display Screen (GT Designer) 21
:Allows to enter the No. of a screen to be displayed next.
• Screen No. 1 is created, and screen changeover is set
so that a corresponding screen is displayed when
either ST. 1 to ST. 3 are is pressed.
ST. 1 key :Fixed value = 2
ST. 2 key : Fixed value = 3
ST. 3 key : Fixed value = 4
* Characters "ST. 1" to "ST. 3" are set as touch keys
or "Text" objects.
• When ST. 1 key is pressed, screen No. 2 is displayed
in accordance with the assigned fixed value.
NEXT key : Fixed value = 6
MENU key : Fixed value = 1
When the MENU key is pressed, screen No. 1 is
displayed in accordance with the assigned fixed value.
Or the previous screen is displayed in accordance with
the upper hierarchy specification described in the next
paragraph.
21-5