Graphic Operation Terminal GOT-F900
Concept on screen display
• To display a screen
- Each screen should be created using characters and graphics.
When FX-PCS-DU/WIN-E is used: Refer to Section 18.
When GT Designer is used: Refer to Section 20.
• To change over screens
- Screen changeover should be set.
When FX-PCS-DU/WIN-E is used: Refer to Section 19.
When GT Designer is used: Refer to Section 21.
Screen display position
The display position of each screen construction element can be specified in dots.
Touch keys should be positioned according to the following mesh.
F940GOT, F943GOT: "20 × 12" matrix configuration (16 dots wide by 20 dots high)
Number of display screens and screen Nos.
• Up to 500 screens can be displayed.
• A screen No. is assigned to each display screen.
When FX-PCS-DU/WIN-E is used: Nos. 0 to 499
When GT Designer is used: Nos. 1 to 500
* Alt though the first screen No. is different, it is automatically converted while it is read in
accordance with the used software.
Number of display elements and data capacity
Each display element is managed as screen data. The allowable number of screens is
restricted as shown below.
Total screen data size
Number of displayable screens
: "15 × 4" matrix configuration (16 dots wide by 20 dots high)
: "30 × 12" matrix configuration (16 dots wide by 20 dots high, last column
composed of 14 dots)
256KB (user screens etc)
512KB (user screens etc)
1MB (user screens etc)
User screens: Up to 500 screens
FX-PCS-DU/WIN-E: Nos. 0 to 499
GT Designer: Nos. 1 to 500
System screens: 25 screens (Nos. 1001 to 1030)
Creation of Display Screens 8