Mitsubishi Electric F930GOT-BWD Operation Manual page 191

Graphic Operation Terminal GOT-F900
Data transfer objects: Transfer data when a key is pressed.
Object name
Switch
Touch Key
Send Data
Bank
Write
Constant
Data Setting
Increment
Decrement
Keyboard
Buzzer
Screen changeover object
Object name
Change
Screen
Controls the ON/OFF status of a bit device in the PLC from a
touch key.
Allows a specified area on the screen to function as a key when
pressed.
The "Touch Key" object is usually combined with a function
such as "Switch" and "Data Setting".
Stores data on up to 4,000 data registers in the PLC.
When a specified input is given, data can be read from or
written to corresponding data registers.
When a specified touch key is pressed, set data is written to a
word device in the PLC.
Allows change to a specified word device in the PLC.
When a key is pressed, a ten-key pad is displayed on the
screen so that a specified numeric can be changed.
Adds "1" to the data of a specified word device in the PLC.
Subtracts "1" from the data of a specified word device in the
PLC.
Displays a keyboard dedicated to numeric change on the
screen.
Issues buzzer sound in the GOT in accordance with the ON/
OFF status of a bit device in the PLC.
Allows to specify the screen changeover condition, destination,
etc.
Creation of Display Screens (FX-PCS-DU/WIN-E) 18
Description
Description
Use example
---
e)
---
---
---
---
---
h)
---
Use example
---
18-3