Mitsubishi Electric F930GOT-BWD Operation Manual page 56

Graphic Operation Terminal GOT-F900
3) Reset of entry code
To reset an entry code and return to the initial setting (in which security is valid), a touch key
should be provided on the screen.
Screen example
Reset of entry code
• To set this touch key, enter "FF69" to the key code.
• The entry code is reset also when the power of the GOT is turned off. When the power
is turned on at the next time, the security is valid.
• It is recommended to lay out the entry code input key and the entry code reset key on
the same screen.
4) Use example
Level 4
Entry code
:444
Screen 5
• Suppose that the security level is set in the screen creation software for Screens 1 to 5
shown above.
• In this case, Screen 1 is displayed when the power is turned on (Level 0).
• When an entry code "222" is entered, Screens 1 to 3 can be displayed and manipulated.
• When an entry code "444" is entered while Screens 1 to 3 are displayed, Screens 1 to 5 can
be displayed and manipulated.
• When the entry code is reset while Screens 1 to 5 are displayed, Screen 1 is displayed
(initial status).
* In the use example shown above, the levels and the screen Nos. are consecutive for easy
understanding. The levels and the screen Nos. are not necessarily consecutive.
Example: Screen 1
Level 3
Entry code
:333
Screen 4
: Level 3
Screen 2 : Level 7
Screen 3 : Level 5
Screen 10 : Level 2
Touch key
Level 2
Level 1
Entry code
Entry code
:222
:111
Screen 3 Screen 2
Start up 7
Level 0
Entry code
Nothing
Screen 1
7-12