Mitsubishi Electric F930GOT-BWD Operation Manual page 178

Graphic Operation Terminal GOT-F900
• Sequence program example
In the program below, a start trigger and an abort trigger are used.
Start trigger: Assigned to M100
Abort trigger: Assigned to M101
M8000
Start
command
M57
Abortion
command
M57
MOV D24
M57
SET M100
RST M100
M57
SET M101
RST M101
• D24 b0 to b7 (write device) are transferred to
K2M50
M50 to M57.
• The start trigger M100 turns ON.
• When M57 turns ON and printing is started,
the start trigger M100 turns OFF.
• The abort trigger M101 turns ON.
• When M57 turns OFF and printing is
aborted, the abort trigger M101 turns OFF.
Screen Hard Copy Function 16
16-4