Communication Monitor (F940Got, F940Wgot) - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
13.5

Communication monitor (F940GOT, F940WGOT)

The status of each communication port is displayed.
Communication monitor screen
Communication status
Standby: Blue
Run: Red
• Communication status
The communication status of each port is displayed.
SD: Sending, RD: Receiving, ERR: Error in communication
Each item is displayed in "Red" for running, displayed in "Blue" on standby.
ERR is displayed in "Blue" during normal operation; displayed in "Red" at the time of error
occurrence.
• Communication type
The name of units used for communication are displayed.
Display item
Display
GOT ⇔ PLC
PC ⇔ PLC
GOT ⇔ PC
BARCODE ⇔ PLC
GOT ⇔ PRINTER
GOT ⇔ GENERAL-
PUPOSE UNITS
GOT ⇔ GOT
NO FUNCTION
[ Screen list ]
GOT ⇔ PLC
COM0 SD
MELSEC-FX(CPU)
RD
ERR No error
COM1 SD GOT ( Printer
RD
ERR No error
GOT ⇔ PLC
COM2 SD
PC(SCREEN DATA)
RD
ERR No error
In the case of F940, only COM0 and COM2 are displayed.
When the GOT is connected to the PLC
When the GOT is connected to a PC
The display shown left appears only when the GOT is CPU-connected to
the FX, A, QnA or Q Series.
Discrimination of the application software (screen creation software/ladder
software) is not made on the PC side.
When the GOT is connected to a PC
The GOT is connected to a PLC manufactured by other companies or units
not having a 2PIF function.
The PC can use the screen creation software only.
When a bar code reader is connected
When a printer is connected
When the GOT is connected to a microcomputer board (general-purpose
unit)
When two or more GOT units are connected
Not connected to any units
END
Communication type
Communication with
Error display
Connected to
Test Mode 13
13-7