Graphic Operation Terminal GOT-F900
u u u u Storage of word device
• Character codes are stored in PLC word devices. The stored data is displayed from the
lower 8 bits as shown below.
Word Device : D0
Data Length : 1
(The broken line is
- A character to be displayed at first should be specified using lower 8 bits.
n n n n Important point
• When the character code is set to "H0", characters after that are not displayed on the
To insert space in a text, store "H20" to the specified word device.
• Display ASCII codes from the left of the screen in order upper eight bits to lower eight bits
when connect MELCEC-A(LINK).
Set the exchange number which adds 16 to an actual exchange number to display ASCII
codes from the left of the screen in order lower eight bits to upper eight bits.
: When two characters (ASCII codes) are displayed
Creation of Display Screens (FX-PCS-DU/WIN-E) 18
From the ASCII code table offered as appendix,
Data storage status