Mitsubishi Electric F930GOT-BWD Operation Manual page 319

Graphic Operation Terminal GOT-F900
d) Number
Enter the number of devices to which data in the GOT is to be transferred.
The number of devices (1 to 4,000) set for recipe No. 1 is used for all other recipes
starting from recipe No. 2.
e) Edit key (for detailed setting)
This key allows setting of each recipe file in details.
1) Operation contents
b) Recipe Name, c) Device and d) Number.
2) Read trigger
When a specified bit device turns ON or OFF, the contents of word devices starting from
the one set in c) Device as many as the number set in d) Number are transferred to the
memory built in the GOT.
3) Write trigger
When a specified bit device turns ON or OFF, the data set in "4 Receipt device" are
transferred to word devices starting from the one set in c) Device.
4) Recipe device
Enter the value of a device to be written to the PLC.
When data is read using "2 Read trigger", this value is overwritten by the read value.
• The write trigger cannot be omitted. The read trigger can be omitted when read is not
required.
Creation of Display Screen (GT Designer) 20
20-45