Mitsubishi Electric F930GOT-BWD Operation Manual page 288

Graphic Operation Terminal GOT-F900
u u u u Storage of word device
• Character codes are stored in PLC word devices. The stored data is displayed from the
lower 8 bits as shown below.
Example 1
Word Device : D0
Data Length : 1
Bg
(background color)
(The broken line is
not actually
displayed.)
- A character to be displayed at first device should be specified using lower 8 bits.
n n n n Important point
• When the character code is set to "H0", characters after that are not displayed on the
screen.
To insert space in a text, store "H20" to the specified word device.
• Display ASCII codes from the left of the screen in order upper eight bits to lower eight bits
when connect MELCEC-A(LINK).
Set the exchange number which adds 16 to an actual exchange number to display ASCII
codes from the left of the screen in order lower eight bits to upper eight bits.
: When two characters (ASCII codes) are displayed
AB
Creation of Display Screen (GT Designer) 20
From the ASCII code table offered as appendix,
A=H41
ASCII code
B=H42
Data storage status
Upper
D0 (H) 4 2
B
Lower
4 1
A
20-14