Connectable Plc - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
1.5

Connectable PLC

Setting of the PLC to be connected is made according to "PLC TYPE" in "Operation
environment setting (see Section 7)".
Connectable PLC
MELSEC FX
FX , FX , FX
2C 0
FX , FX , FX
1S 0N
FX and FX
2N
Series manufactured
by Mitsubishi Erectric
MELSEC A Series
manufactured by
Mitsubishi Erectric
MELSEC QnA Series
manufactured by
Mitsubishi Erectric
MELSEC Q Series
manufactured by
Mitsubishi Erectric
MELSEC FX-10GM,
FX-20GM, E-20GM,
FX -10GM, FX
2N
20GM positioning
units
Motion controllers
A171SCPU-S3,
A171SHCPU,
A172SHCPU and
A272UHCPU
Direct connection
to CPU
RS-232C RS-422
, FX ,
1 2
,
0S
,
1N
¡
2NC
¡
-
2N
Computer link
Upper link
RS-232C RS-422
¡
¡ ¡ ¡
¡ ¡ ¡
¡ ¡
¡
¡
Introduction 1
Remarks
For connection to FX
1S
Series, the following versions
should be used.
F930GOT, V2.10 or later should be
used.
F940GOT and F943GOT, V4.00 or
later should be used.
F940WGOT, any version may be
used.
Any version may be used.
When a communication unit is
used, settings for direct connection
to CPU should be made.
F930GOT, V2.00 or later should be
used.
F940GOT and F943GOT, V3.00 or
later should be used. (When a
version is former than V3.00 and
computer link connection is made,
only setting for computer link for A
Series is available.)
F940WGOT, any version may be
used.
When a communication unit is
used, settings for direct connection
to CPU should be made.
F930GOT, V2.20 or later should be
used.
F940GOT and F943GOT, V4.10 or
later should be used.
F940WGOT, any version may be
used.
F930GOT, V4.10 or later should be
used.
F940GOT, V6.10 or later should be
used.
F940WGOT, V1.10 or later should
be used.
Any version may be used.
1-6
and FX
1N