Graphic Operation Terminal GOT-F900
10.2
PROGRAM LIST
When a MELSEC FX Series PLC manufactured by MITSUBISHI is connected, sequence
programs stored in the PLC can be read/written/inserted/deleted in instruction list format.
• Program list
- Program all clear: All programs stored in the PLC are cleared.
- Read: Devices can be read by specifying step Nos. or giving instruction words.
- Write: Programs can be written. (While the PLC is running, programs cannot be written.)
- Insertion: Programs can be inserted.
- Deletion: Programs can be deleted by one instruction at a time.
• Program list monitor
Refer to Paragraph 10.5.
HPP Mode 10
10-2