Mitsubishi Electric F930GOT-BWD Operation Manual page 266

Graphic Operation Terminal GOT-F900
Display of screen by bit device
• An example of screen changeover by ON/OFF of a bit device in the PLC is shown below.
In this example, the "Change Screen" object is set for an individual screen.
- Setting for individual screen
* MONITOR *
STOPPING
Y0
ON
To screen To screen
No. 10 No. 20
• If either of Y0, Y1 or Y2 (a contact) becomes ON while screen No. 0 is displayed, a
corresponding screen is displayed.
Y1 Y2
ON ON
To screen
No. 30
Changeover of Display Screen (FX-PCS-DU/WIN-E) 19
• Screen No. 0 is created, and the "Change Screen"
object is set as follows.
Condition
Control Input Bit Device
1 Not specified
2 Not specified
3 Not specified
• Example of sequence program
Screen
No.
(Direct)
Y0/On 10
Y1/On 20
Y2/On 30
When Y0 becomes ON,
Y0
screen No. 10 is displayed.
When Y0 becomes ON,
Y1
screen No. 20 is displayed.
When Y0 becomes ON,
Y2
screen No. 30 is displayed.
Save Current
Screen
Not effective
Not effective
Not effective
19-10