Mitsubishi Electric F930GOT-BWD Operation Manual page 232

Graphic Operation Terminal GOT-F900
5) Label
Enter text to be displayed inside the touch key.
Up to 40 characters can be displayed.
<Display example:>
-In the case of 1 line
abc
ƒA•[ƒ•
When text is located
in the center
If text is longer than the touch key, the text is extruded.
abcdABCD1234
ƒA•[ƒ•
When text is displayed in 1 line
6) Key Type
• Select whether or not the touch key area is enclosed with a frame.
• Select "No frame" or select one among the following ten frames.
(Five frames before V2.30)
Frame
shape
7) Additional functions
The following functions can be assigned to a touchkey.
- Switch (Refer to Paragraph 18.5.2.)
- Increment (Refer to Paragraph 18.5.5.)
- Decrement (Refer to Paragraph 18.5.6.)
- Write Constant (Refer to Paragraph 18.5.4.)
- Send Data Bank (Refer to Paragraph 18.5.3.)
- Data Setting (Refer to Paragraph 18.5.7.)
- Change Screen (Refer to Paragraph 18.5.9.)
-In the case of 2 lines
abc
ƒA•[ƒ•
ABC
•ã•¸
No frame Shaded
Creation of Display Screens (FX-PCS-DU/WIN-E) 18
-In the case of 3 lines
abc
ƒA•[ƒ•
ƒA•[ƒ•
ABC
ABC
•ã•¸
123
When the first line
is blank, text is
displayed in the
second line
Double frame Double frame
(keyboard) (trimming)
abc
ƒA•[ƒ•
•ã•¸ •ã•¸
123
When the second line is
blank, texts is displayed
in the first and third lines
respectively
Double frame
(shaded)
Two or more of these functions can
be set to a touch key.
Only one of these function can be
set to a touch key.
( T h e f u n c t i o n s a b o ve c a n b e
combined.)
Double frame
(bold)
18-44