Change Screen" Object; Contents Of Setting - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
19.2

"Change Screen" object

Use the "Change Screen" object to change over screens.
The "Change Screen" object is important. It allows to specify a screen to be displayed next
after the currently displayed screen when the trigger condition (operation key in the GOT and
bit device in the PLC) is satisfied.
19.2.1

Contents of setting

In the "Change Screen" object, the following three main items are to be set.
1) Condition
Set the condition which triggers screen changeover.
2) Destination Screen
Set the destination screen to be displayed when the trigger condition is satisfied.
3) Save Current Screen
Set whether or not the screen No. of the currently displayed screen is to be stored in the
memory before screen changeover.
Condition
Set the condition to trigger screen changeover.
An operation key in the GOT and a bit device in the PLC can be set here.
Control Input
(in GOT)
Bit Device
(in PLC)
When both "Control Input" and "Bit Device" are satisfied, the display screen is changed over.
Set item
Touch key
None
Bit device
None
(Always Change)
Changeover of Display Screen (FX-PCS-DU/WIN-E) 19
Common setting for all screens: Touch keys Nos.
50 to 99
Setting for individual screen: Touch keys Nos. 0 to 49
There is no condition for operation key.
Bit device X, Y, M, S, T or C (a contact or b contact)
There is no condition for PLC.
Description
50 keys
in total
19-2