Alarm History Clear Using Key Code - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
4) Flow display (FX-PCS-DU/WIN-E: V2.41 or later, GT Designer: SW1D5C-GOTR-PACK or
later)
When an alarm device turns ON, a corresponding alarm message is displayed at the
bottom of the user screen.
Alarm message
- In the case of FX-PCS-DU/WIN-E
The Moving Alarm can be set Report in the setting window in "View/Project"-"Alarms" in
FX-PCS-DU/WIN-E.
The notification method is limited to one of, screen changeover, window display and flow
display described above.
- In the case of GT-Designer
Set by editing "Common Setting"-"Auxiliary Setting"-"Screen" in the screen creation
software whether or not the flow display is to be performed. (In the initial value, the flow
display is effective.)
12.2.2

Alarm history clear using key code

In the case of the following versions or later of the GOT and screen creation software, it is
possible to assign a key code to a touch key and clear the alarm history.
Applicable version
GOT
Product model name
F930GOT
F940, F943GOT
F940WGOT
Screen creation software
Software name
GT Designer
FX-PCS-DU/WIN-E
By pressing a touch switch assigned the following key code on a screen displaying the alarm
history display function, the alarm history can be cleared.
Key code
FFB6(H)
FFB7(H)
• A message scrolls from the right to the left.
• When two or more alarms have occurred, corresponding
messages are displayed in ascending order of alarm device
No.
• When alarm devices turn OFF, alarm messages disappear.
• Alarm messages are displayed transparently on the user
screen, so keys on the user screen are effective.
Applicable version
SW2D5C-GOTR-PACK(A) or later
If the alarm selected with the cursor is solved, its history is cleared.
All the solved alarms are cleared regardless of the cursor position.
Version
V2.00 or later
V3.00 or later
V1.00 or later
V2.30 or later
Function
Alarm Mode 12
12-5