Mitsubishi Electric F930GOT-BWD Operation Manual page 259

Graphic Operation Terminal GOT-F900
Destination Screen
Set the specification method of the destination screen to be displayed after the currently
displayed screen.
When 1] Condition is satisfied, the screen is displayed in accordance with the specification
method set here.
Set item
Direct
PLC
data register
DU memory
Save Current Screen
Set whether or not the screen No. of the currently displayed screen is to be stored in the
memory before screen changeover. To save it, add a check mark.
The screen No. saved by this function is regarded as the screen No. to be displayed when "DU
memory" is selected in "2) Destination Screen".
When this item is selected, the No. of a screen to be displayed next (one among user
screens N0. 0 to 499 and system screens No. 1001 to 1030) can be entered here
directly.
When this item is selected, a screen (one among the screens Nos. 0 to 499 and 1001
to 1030) stored in control devices (data registers D+0 to D+2) in the PLC is displayed
next.
* The control devices can be selected using the screen creation software.
When this item is selected, a screen stored in the memory in the GOT is displayed
next.
Changeover of Display Screen (FX-PCS-DU/WIN-E) 19
Description
19-3