Mitsubishi Electric F930GOT-BWD Operation Manual page 263

Graphic Operation Terminal GOT-F900
Example of screen changeover using touch keys
• Examples of screen changeover using touch keys are shown below. Set the "Change
Screen" object for all screens (common setting) and for individual screen.
- Common setting for all screens
In this example, screen No. 0 is displayed from any screen when the MENU key is
pressed.
Characters "MENU" are displayed by the "Text" object.
Condition
Control
Input
Touch key
1
No. 50
- Setting for individual screen
Screen No. 1 : Menu screen
Touch
* SETTING MENU *
key
ST. 1
No.0 NUMBER OF MANUFACTURE
ST. 2
No.1 PROCESSING TIME
No.2 ST. 3 SCREW TIGHTENING NUMBER
ST. 1
To screen To screen
No. 2
Screen No. 1
* STATION 1 (1/2) *
NUMBER OF TARGETS
NEXT
NEXT
NEXT
To screen
No.6
• When the " " key is pressed, screen No. 6 is displayed without regard to the ON/OFF
status of bit devices in the PLC.
• When the MENU key is pressed, screen No. 0 is displayed in accordance with the setting of
the "Change Screen" object set for all screens.
Screen
No.
Bit Device
(Direct)
Not specified
ST. 2 ST. 3
To screen
No. 3 No.4
100
MENU
MENU
To screen
No.1
Changeover of Display Screen (FX-PCS-DU/WIN-E) 19
Save Current
Screen
0 Not effective
• Screen No. 0 is created, and screen changeover is set
as follows.
Screen No. 0 is a menu screen.
When either of the ST. 1 to ST. 3 keys is pressed, a
corresponding screen is displayed.
Condition
Control
Input
Touch key
1 Not specified
No. 0
Touch key
2 Not specified
No. 1
Touch key
3 Not specified
No. 2
• Characters "ST. 1" to "ST. 3" are displayed by the
"Text" object.
• Screen changeover for screen No. 1 is set as follows.
Condition
Control
Input
Touch key
1
Not specified
No. 0
For screen changeover by
screen No. stored in memory,
refer to Paragraph 19.5.
Screen
No.
Bit Device
(Direct)
1
2
3
Screen
No.
Bit Device
(Direct)
1
Save Current
Screen
Not effective
Not effective
Not effective
Save Current
Screen
Not effective
19-7