Alarm List - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
12.3.2

Alarm list

This paragraph describes the operating procedure to display the alarm list.
In alarm status, devices with ON status are displayed together with corresponding alarm
messages. Alarms can be confirmed (using the ACK key) and alarm devices reset.
The alarm list is displayed in ascending order of alarm device No.
u u u u Basic operation
ALARM MODE
screen is displayed.
Paragraph 7.3
[ DISPLAY STATUS ] TOTAL=4 END
CALL THE PERSON IN CHARGE
TIME OVER
PRESSURE IS ABNORMAL
PLEASE ADD PARTS
b)
ACK RESET
c) d)
• The ACK, RESET and DETAIL keys can be set using the screen creation software.
ACK key
RESET key
DETAIL key
1) Confirmation operation (valid when FX-PCS-DU/WIN-E is used)
The operator can perform this operation to confirm that alarms have occurred.
Place the cursor on an alarm to be confirmed using the scroll keys, and press the ACK key
c).
[ DISPLAY STATUS ]
1 CALL THE PERSON IN CHARGE
2 TIME OVER
5 PRESSURE IS ABNORMAL
6 PLEASE ADD PARTS
To reset (set to OFF) an alarm message, perform the reset operation described overleaf.
DISPLAY STATUS
Select "DISPLAY
STATUS".
a)
a) Number of alarm devices ON
b) Alarm message
DETAIL
e)
c) ACK key
d) RESET key
e) DETAIL key to display a detailed message
FX-PCS-DU/WIN-E
If the alarm device is OFF when the ACK key is pressed,
TOTAL=4 END
the corresponding alarm message is deleted from the
alarm list and alarm messages after that are shifted
upward.
If the alarm device is ON when the ACK key is pressed, the
corresponding message remains displayed.
: Scroll the display by one line.
The DISPLAY
STATUS screen
: Scroll the display by seven lines.
is displayed.
• When FX-PCS-DU/WIN-E is used, comments created
in "Alarms" are displayed.
• When GT Designer is used, comments which are
created in "Comment Edit" and specified by "Comment
No." in "Alarm History Common Setting"-"Monitor
Device" are displayed.
GT Designer
Alarm Mode 12
12-9