Mitsubishi Electric F930GOT-BWD Operation Manual page 242

Graphic Operation Terminal GOT-F900
n n n n Important point
1) Rule on data change
• When changing data, make sure to display the "Number" object whose "Word Device" is
equivalent to "Word Device" of the "Data Setting" object on the same screen.
The following restriction is imposed on data change.
1) "Data Changeable" of the "Number" object should be made effective with a check mark
when the "Number" object is registered. If it is not made effective, the keyboard is not
displayed even when the touch key to call the keyboard is pressed.
2) The data in the "Number" object can be changed within the range determined by
"Minimum Value" and "Maximum Value".
3) When a hexadecimal value (H) is displayed on the screen, make sure to use the
keyboard for hexadecimal input. When a decimal value is displayed, any keyboard can
be used.
2) Timing of data change
• When the ENT key is pressed, the entered data is written to the PLC. The condition for
data change is equivalent to that for the "Increment" and "Decrement" objects. Even
while data is changed, monitors for numerics, bar graphs, etc. on the screen are
operating.
Creation of Display Screens (FX-PCS-DU/WIN-E) 18
18-54