Mitsubishi Electric F930GOT-BWD Operation Manual page 207

Graphic Operation Terminal GOT-F900
5) Gain 1, Gain 2 and Offset
The value obtained by the calculation "(Monitor value
displayed.
Example: When the monitor value is 1000 (current value of D100), "Gain 1" is set to 10,
6) Data Changeable
• When this attribute is made effective (with a check mark), data can be changed if the
"Increment", "Decrement", "Data Setting" or "Keyboard" object is combined.
• For the operating procedure, refer to Paragraph 3.2.
7) Minimum Value and Maximum Value
Specify the input range adopted when "Data Changeable" is made effective.
8) User ID (Refer to Paragraph 9.6.)
A serial No. is automatically assigned to each registered "Number" object in the order of
registration.
By checking this No., the changed "Number" object can be detected.
When input is completed, the user ID No. of the changed "Number" object is stored in the
control device "D¡+7".
Next ID
This attribute allows to specify the change order of "Number" objects.
By entering the user ID No., the change order can be arbitrarily specified.
u u u u Display example
"Text" object
Gain 2 is set to 2 and "Offset" is set to 3
(1000 10 / 2) + 3 = 5003 -> "5003" is displayed.
When a numeric is entered (Refer to Section 3.), the result of the following
arithmetic operation is stored in the specified word device.
(Input value - Offset) / Gain 1
HEATING TIME
LINE 1
LINE 2
Creation of Display Screens (FX-PCS-DU/WIN-E) 18
Gain 1 / Gain 2) + Offset" is
Gain 2
89.6 s
126.3 s
"Number" object
18-19