Download  Print this page

Operation Environment Setting - Mitsubishi Electric F940 Hardware Manual

Graphic operation terminal f940.
Hide thumbs

Advertisement

F940GOT-SWD-E/LWD-E
3.2

Operation environment setting

The operation environment setting function performs initial setting important to operation of the
GOT. The SET-UP MODE screen can be displayed by turning on the power while pressing and
holding the upper left corner of the screen in accordance with "3.1 Startup procedure" or by
selecting "SET-UP MODE" on the OTHER MODE screen.
If an entry code has been registered using the security function (described in the F940GOT
Operation Manual offered separately), however, the operation environment can be set only
when an entry code input by the user is equivalent to the registered entry code.
Turn on the power while pressing and
holding the upper left corner of the screen.
Set the system language (Refer to p. 44.).
Press the END key.
The SET-UP MODE screen is displayed.
[ SET-UP MODE screen ]
[ SET-UP MODE ]
a)
LANGUAGE
b)
PLC TYPE
c)
SERIAL PORT
d)
OPENING SCREEN
e)
MAIN MENU CALL KEY
f)
SET CLOCK
g)
SET BACKLIGHT
h)
BUZZER
i )
LCD CONTRAST
j )
CLEAR USER DATA
Startup 3.
END
k)
l )
l )
3-5

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric F940

   Related Content for Mitsubishi Electric F940

This manual is also suitable for:

F940got-lwd-eF940got-swd-e

Comments to this Manuals

Symbols: 0
Latest comments:
  • sgarber Mar 19, 2015 12:28:
    I cannot seem to use the new controller​. It does not accept new sizes or in Fractions. The majority of our cutting is in fractions. I need some help with this.