Screen Changeover By Touch Key - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
10.3

Screen changeover by touch key

This paragraph describes screen changeover using a touch key.
When a touch key is used for screen changeover, the screen display is changed over to the
specified destination when the touch key becomes ON. Enter an arbitrary touch key to "Control
Input" in "Condition". Select "Direct" in "Destination Screen", and enter a desired screen No. to
"Screen No."
Set item
Control Input
(in GOT)
Bit Device
Screen No.
Available touch keys
Common setting for all screens: Touch keys Nos. 50 to 99
Setting for individual screen: Touch keys Nos. 0 to 49
Do not select "Bit Device". (Do not enter any bit device No.)
Enter the screen No. of a screen to be displayed next among user screens Nos. 0
to 499 and system screens Nos. 1001 to 1030.
Changeover of Display Screen (FX-PCS-DU/WIN-E) 10
Description
50 keys in all
10-6