Figure 12-16: Removing The Opto-Pickup Assembly - Teledyne T300 Operation Manual

Teledyne API – Model T300/T300M CO Analyzer
06864B DCN6314
7. Carefully remove the opto-pickup printed circuit assembly.

Figure 12-16: Removing the Opto-Pickup Assembly

8. Remove the three (3) screws holding the GFC Wheel motor/heat sink assembly to
the GFC Wheel housing.
9. Carefully remove the GFC Wheel motor/heat sink assembly from the GFC Wheel
housing.
GFC WHEEL HOUSING
Figure 12-17: Removing the GFC Wheel Housing
Troubleshooting and Service
Opto-Pickup
291