Configuring Ethernet Communication Using Dynamic Host Configuration Protocol (Dhcp); Figure 6-5 : Comm - Lan / Internet Automatic Configuration (Dhcp) - Teledyne T300 Operation Manual

Teledyne API – Model T300/T300M CO Analyzer
6.5.2. CONFIGURING ETHERNET COMMUNICATION USING DYNAMIC
HOST CONFIGURATION PROTOCOL (DHCP)
EDIT button
is disabled
when DHCP
is ON.
DO NOT alter unless
instructed to by Teledyne
Instruments' customer
Service personnel.
Both TCP ports
are inactive when
this is set for
OFF.
Figure 6-5 :
06864B DCN6314
The default Ethernet setting is DHCP.
1. See your network administrator to affirm that your network server is running DHCP.
2. Access the Communications Menu (SETUP>MORE>COMM) and follow the setup
sequence as shown in Figure 6-5.
SETUP X.X COMMUNICATIONS MENU
ID INET COM1 COM2
SETUP X.X ENTER PASSWORD:818
8 1 8
SETUP X.X DHCP:ON
<SET SET> EDIT
SETUP X.X INST IP:0.0.0.0
<SET SET>
SETUP X.X GATEWAY IP:0.0.0.0
<SET SET>
SETUP X.X SUBNET MASK IP:0.0.0.0
<SET SET>
d
SETUP X.X TCP PORT:3000
<SET SET> EDIT
SETUP X.X TCP PORT:3000
<SET SET> EDIT
SETUP X.X HOSTNAME: T300
<SET SET> EDIT
SETUP X.X ONLINE:ON
<SET SET> EDIT
SETUP X.X INITIALIZATION SUCCEEDED
COMM – LAN / Internet Automatic Configuration (DHCP)
Communications Setup and Operation
EXIT
ENTR EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
SETUP X.X INITIALIZING INET 0%
INITIALIZATION process proceeds
automatically
SETUP X.X
SETUP X.X COMMUNICATIONS MENU
ID ADDR INET
INITIALIZATION FAILED
Contact your
EXIT
IT Network
Administrator.
151