Teledyne T300 Operation Manual page 369

Teledyne API - T300/T300M and M300E/EM PN 04906H (DCN5840)
Table A-3:
TEST FUNCTION NAME
RANGE
RANGE1
RANGE2
CO2RANGE
O2RANGE
STABILITY
2
RESPONSE
COMEAS
COREF
MRRATIO
4, 5
AUTOZERO
SAMPPRESS
9
PURGEPRESS
8
VACUUM
6
SAMPFLOW
SAMPTEMP
BENCHTEMP
WHEELTEMP
10
O2CELLTEMP
BOXTEMP
4
BOXTEMP2
11
OVENTEMP
PHOTOTEMP
COSLOPE
COSLOPE1
COSLOPE2
COOFFSET
COOFFSET1
06864B DCN6314
T300/T300M and M300E/EM Test Functions, Revision L.8
MESSAGE TEXT
3
RANGE=50.0 PPM
3, 7
CO RANGE=50.0 PPM
3
RANGE1=50.0 PPM
3, 7
CO RANGE1=50.0 PPM
3
RANGE2=50.0 PPM
3, 7
CO RANGE2=50.0 PPM
7
CO2 RANGE=20 %
10
O2 RANGE=100 %
3
STABIL=0.0 PPM
3, 7, 10
CO STB=0.0 PPM
7
CO2 STB=0.0 %
10
O2 STB=0.0 %
RSP=0.20(0.00) SEC
CO MEAS=4125.0 MV
CO REF=3750.0 MV
MR RATIO=1.100
AZERO RATIO=1.234
PRES=29.9 IN-HG-A
PURGE=7.5 PSIG
VAC=6.8 IN-HG-A
SAMP FL=751 CC/M
SAMPLE TEMP=26.8 C
BENCH TEMP=48.1 C
WHEEL TEMP=68.1 C
O2 CELL TEMP=50.2 C
BOX TEMP=26.8 C
BOX TEMP2=29.6 C
OVEN TEMP=30.1 C
PHT DRIVE=2500.0 MV
SLOPE=1.000
7
CO SLOPE=1.000
SLOPE1=1.000
7
CO SLOPE1=1.000
SLOPE2=1.000
7
CO SLOPE2=1.000
OFFSET=0.000
7
CO OFFSET=0.000
OFFSET1=0.000
7
CO OFFSET1=0.000
APPENDIX A-3: Warnings and Test Functions
DESCRIPTION
D/A range in single or auto-range modes.
D/A #1 range in dual range mode.
D/A #2 range in dual range mode.
CO range.
2
O range.
2
Concentration stability (standard deviation
based on setting of STABIL_FREQ and
STABIL_SAMPLES).
Instrument response. Length of each
signal processing loop. Time in
parenthesis is standard deviation.
Detector measure reading.
Detector reference reading.
Measure/reference ratio.
Measure/reference ratio during auto-
reference.
Sample pressure.
Purge pressure
Vacuum pressure.
Sample flow rate.
Sample temperature.
Bench temperature.
Wheel temperature.
O sensor cell temperature.
2
Internal box temperature.
Internal box temperature #2.
Oven temperature
Photometer temperature.
CO slope for current range, computed
during zero/span calibration.
CO slope for range #1 in dual range
mode, computed during zero/span
calibration.
CO slope for range #2 in dual range
mode, computed during zero/span
calibration.
CO offset for current range, computed
during zero/span calibration.
CO offset for range #1 in dual range
mode, computed during zero/span
calibration.
A-23