Editing Das Channels - Teledyne T300 Operation Manual

Teledyne API – Model T300/T300M CO Analyzer

7.1.4. EDITING DAS CHANNELS

SAMPLE RANGE=50.0 PPM
<TST TST> CAL
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE
Main iDAS Menu
SETUP X.X DATA ACQUISITION
VIEW EDIT
SETUP X.X ENTER PASSWORD:818
8 1 8
EDIT Channel Menu
SETUP X.X 0) CONC: ATIMER 1, 800
NEXT INS
Enters EDIT mode for the selected channel
06864B DCN6314
DAS configuration is most conveniently done through the APICOM remote control
program. The following list of button strokes shows how to edit the DAS using the front
panel.
CO= XX.XX
SETUP
EXIT
EXIT
ENTR EXIT
DEL EDIT PRNT EXIT
When editing the data channels, the top line of the display indicates some of the
configuration parameters.
For example, the display line:
0) CONC: ATIMER, 1, 800
Translates to the following configuration:
Channel No.: 0
NAME: CONC
TRIGGER EVENT: ATIMER
PARAMETERS: One parameter is included in this channel
EVENT: This channel is set up to store 800 records.
Data Acquisition System (DAS) and APICOM
DAS EDIT – Control Button Functions
Button
PREV
Selects the previous data channel in the list
NEXT
Selects the next data channel in the list
Inserts a new data channel into the list BEFORE the
INS
selected channel
DEL
Deletes the currently selected data channel
EDIT
Enters EDIT mode
Exports the configuration of all data channels to the
PRINT
RS-232 interface
Buttons only appear when applicable.
FUNCTION
173