Pneumatic Layout For Basic Configuration; Pneumatic Connections For Ambient Zero/Ambient Span Valve Option; Figure 3-20: T300/T300M Internal Gas Flow (Basic Configuration) - Teledyne T300 Operation Manual

Teledyne API – Model T300/T300M CO Analyzer

3.3.2.2. PNEUMATIC LAYOUT FOR BASIC CONFIGURATION

SAMPLE GAS
INLET
EXHAUST
GAS OUTLET
PUMP
Figure 3-20:

3.3.2.3. PNEUMATIC CONNECTIONS FOR AMBIENT ZERO/AMBIENT SPAN VALVE OPTION

06864B DCN6314
Particulate Filter
Flow / Pressure
Sensor PCA
Sample Gas
Flow Control
T300/T300M Internal Gas Flow (Basic Configuration)
This valve option is intended for applications where:
•
Zero air is supplied by a zero air generator like the Teledyne API's T701 and;
•
Span gas is supplied by Gas Dilution Calibrator like the Teledyne API's T700.
Internal zero/span and sample/cal valves control the flow of gas through the instrument,
but because the generator and calibrator limit the flow of zero air and span gas, no
shutoff valves are required.
See Figure 3-4 for the location of gas inlets.
GFC Motor Heat Sync
GFC Wheel
SAMPLE CHAMBER
SAMPLE
PRESSURE
SENSOR
FLOW
SENSOR
Getting Started
INSTRUMENT CHASSIS
Housing
65