Teledyne T300 Operation Manual page 364

APPENDIX A-2: Setup Variables For Serial I/O
Setup Variable
SERIAL_NUMBER
DISP_INTENSITY
I2C_RESET_ENABLE
CLOCK_FORMAT
3,4
ALARM_TRIGGER
REF_SDEV_LIMIT
A-18
Teledyne API - T300/T300M and M300E/EM PN 04906H (DCN5840)
Numeric Default
Units Value
— "00000000 "
0
0
— HIGH
— ON
"TIME=%H:%
—
M:%S"
Cycles 10
mV 50
Value
Range
Any character Unique serial number for
in the allowed instrument.
character set.
Up to 100
characters
long.
HIGH, Front panel display intensity.
MED,
LOW,
DIM
OFF, ON ON enables automatic reset of
2
the I C bus in the event of
communication failures; OFF
disables automatic reset.
Any character Time-of-day clock format flags.
in the allowed Enclose value in double quotes
character set. (") when setting from the RS-232
Up to 100 interface.
characters
"%a" = Abbreviated weekday
long.
name.
"%b" = Abbreviated month name.
"%d" = Day of month as decimal
number (01 – 31).
"%H" = Hour in 24-hour format
(00 – 23).
"%I" = Hour in 12-hour format (01
– 12).
"%j" = Day of year as decimal
number (001 – 366).
"%m" = Month as decimal
number (01 – 12).
"%M" = Minute as decimal
number (00 – 59).
"%p" = A.M./P.M. indicator for
12-hour clock.
"%S" = Second as decimal
number (00 – 59).
"%w" = Weekday as decimal
number (0 – 6; Sunday is 0).
"%y" = Year without century, as
decimal number (00 – 99).
"%Y" = Year with century, as
decimal number.
"%%" = Percent sign.
1–100 Concentration alarm trigger
sensitivity adjustment.
0.1–500 Reference detector standard
deviation must be below this limit
to switch out of startup mode.
Description
06864B DCN6314