Operation - Teledyne T300 Operation Manual

IMPORTANT SAFETY INFORMATION
Important safety messages are provided throughout this manual. Please read these messages carefully.
A safety message alerts you to potential hazards that could hurt you or others. Each safety message is
associated with a safety alert symbol. These symbols are found in the manual and inside the instrument. The
definition of these symbols is described below:
This instrument should only be used for the purpose and in the manner
described in this manual. If you use this instrument in a manner other
than that for which it was intended, unpredictable behavior could ensue
with possible hazardous consequences.
Note
06864B DCN6314
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying
message for specific information.
CAUTION: Hot Surface Warning
Technician Symbol: All operations marked with this symbol are to
be performed by qualified maintenance personnel only.
DO NOT TOUCH: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s)
and/or the instrument.
Electrical Ground: This symbol inside the instrument marks the
central safety grounding point for the instrument.
CAUTION - General Safety Hazard
NEVER use any gas analyzer to sample combustible gas(es).
Technical Assistance regarding the use and maintenance of the
T300/T300M or any other Teledyne API product can be obtained by
contacting Teledyne API's Customer Service Department:
Email:
or by accessing various service options on our website at
Phone: 800-324-5190
api-customerservice@teledyne.com
7http://www.teledyne-api.com/.
iii