Corrected Safety Compliance (Was: Iec 61010-1:90 + A1:92 - Teledyne T300 Operation Manual

REVISION HISTORY
2012, February 14, T300/300M Manual, PN06864 Rev B
Document
Top Assy Manual
2010, September 14, T300 Manual, PN06864 Rev Error! Unknown document property name., DCN6314
Initial Release
06864B DCN6314
This section provides information regarding changes to this manual.
PN Rev DCN
06864 B 6314 Administrative changes: restructure to new T-Series format:
Technical changes:
Change Summary
Consolidated Options sections and restructured into tabular
•
format; moved to Section 1.

Corrected Safety Compliance (was: IEC 61010-1:90 + A1:92 +

•
A2:95; is: IEC 61010-1:2001).
Added North American Certification statement.
•
nd
Section 2.1 – added 2
•
Replaced Fig 3-5 with correct internal layout illustration (was
•
short box; is long box).
Move pneumatic illustrations from Options section to
•
pneumatic setup section.
Gathered communications setup and operation into one group
•
(Section 6).
Renamed Part III from "Technical Information" to "Maintenance
•
and Service".
Renamed "Troubleshooting and Repair" to "Troubleshooting
•
and Service".
Renamed section "Theory of Operation" to "Principles of
•
Operation".
Moved "Principles of Operation" section after "Maintenance"
•
and "Troubleshooting and Service" sections.
Moved FAQs to end of Troubleshooting/Service section
•
Moved Glossary to end of manual before Index.
•
Status Outputs: added connection line for +5V to external
•
device (Fig 3-11) and corrected DC Power pin description
(Table 3-6, deleted "combined rating w/Control Output if used").
Section 3.3.1.8: modify Multidrop connection section to clarify
•
insructions and add detail.
Correct COM1 default baud rate value to 115,200 (was:
•
19,200)
Added USB driver download instructions (Section 6.6)
•
Replaced Appendix D Wiring List Rev A with Rev B.
•
Replaced Appendix D Wiring Diagram Rev A with Rev B.
•
Swapped Appendix D Prss/Flow Transducer was 04003
•
(assembly dwg) is 04354 (elec. schematic).
Replaced Appendix D Schematic 06731 Rev A with Rev B.
•
gas sensor options specs.
ix