Table of Contents
Advertisement
Overview of Operating Modes
4.3.4. SECONDARY SETUP MENU (SETUP>MORE)
Table 4-5:
Secondary Setup Mode (SETUP>MORE) Features and Functions
MODE OR FEATURE
External Communication
Channel Configuration
System Status Variables
System Diagnostic Features
and
Analog Output Configuration
1
Alarm Limit Configuration
1
Alarm warnings only present when optional alarm package is activated.
I
MPORTANT
96
CONTROL
BUTTON
Used to set up and operate the analyzer's various serial
COMM
channels including RS-232,RS-485, modem communication,
Ethernet and/or USB.
Used to view various variables related to the instruments current
operational status.
• Changes made to any variable are not recorded in the
VARS
instrument's memory until the ENTR button is pressed.
• Pressing the EXIT button ignores the new setting.
Used to access a variety of functions that are used to configure,
test or diagnose problems with a variety of the analyzer's basic
DIAG
systems.
Most notably, the menus used to configure the output signals
generated by the instruments Analog outputs are located here.
Used to turn the instrument's two alarms on and off as well as
ALRM
set the trigger limits for each.
Any changes made to a variable during the SETUP procedures are not
acknowledged by the instrument until the ENTR button is pressed. If the
EXIT button is pressed before the ENTR button, the analyzer will beep,
alerting the user that the newly entered value has not been accepted.
Teledyne API – Model T300/T300M CO Analyzer
DESCRIPTION
I
R
MPACT ON
EADINGS OR
SECTION
D
ATA
06864B DCN6314
MANUAL
5.7
5.8
5.9
5.10
Advertisement
Table of Contents
Troubleshooting
