Operation - Teledyne T300 Operation Manual

Introduction, Features and Options
Option
Option
Number
Current Loop Analog
Outputs
41
Parts Kits
42A
45
Calibration Valves
50A
50B
50E
50H
Communication Cables
60A
60B
60C
60D
Concentration Alarm Relay
61
RS-232 Multidrop
62
Second Gas Sensors
65A
67A
28
Description/Notes
Adds isolated, voltage-to-current conversion circuitry to the analyzer's analog
outputs.
Can be configured for any output range between 0 and 20 mA.
May be ordered separately for any of the analog outputs.
Can be installed at the factory or retrofitted in the field.
Spare parts and expendables
Expendables Kit includes a recommended set of expendables for
one year of operation of this instrument including replacement sample
particulate filters.
Spare Parts Kit includes spares parts for one unit.
Used to control the flow of calibration gases generated from external sources, rather
than manually switching the rear panel pneumatic connections.
Ambient Zero and Ambient Span.
Ambient Zero and Pressurized Span
Zero Scrubber and Pressurized Span
Zero Scrubber and Ambient Span
For remote serial, network and Internet communication with the analyzer.
Type Description
Shielded, straight-through DB-9F to DB-25M cable, about
RS-232 1.8 m long. Used to interface with older computers or
code activated switches with DB-25 serial connectors.
Shielded, straight-through DB-9F to DB-9F cable of about
RS-232
1.8 m length.
Patch cable, 2 meters long, used for Internet and LAN
Ethernet
communications.
Cable for direct connection between instrument (rear
USB
panel USB port) and personal computer.
Issues warning when gas concentration exceeds limits set by user.
Four (4) "dry contact" relays on the rear panel of the instrument. This
relay option is different from and in addition to the "Contact Closures"
that come standard on all TAPI instruments.
Enables communications between host computer and up to eight analyzers.
Multidrop card seated on the analyzer's CPU card.
Each instrument in the multidrop network requires this card and a
communications cable (Option 60B).
Choice of one additional gas sensor.
Oxygen (O ) Sensor
2
Carbon Dioxide (CO ) Sensor
2
Teledyne API – Model T300/T300M CO Analyzer
Reference
Sections 3.3.1.3,
3.3.1.4, 5.9.1,
5.9.2 and 5.9.3.7
Appendix B
Appendix B
Sections 3.3.2.3
and 3.3.2.4
Sections 3.3.2.5
and 3.3.2.6
Sections 3.3.2.7
and 3.3.2.8
Sections 3.3.2.9
and 3.3.2.10
Section 3.3.1.8
and 6.3
Sections 3.3.1.8,
and 6.3
Sections 3.3.1.8
and 6.5
Sections 3.3.1.8
and 6.6
Section 3.3.1.7
Sections 3.3.1.8
and 5.7.1
• Sections 3.3.1.3
and 9.7.1
• Sections 3.3.1.3
and 9.7.2
06864B DCN6314