O2 Sensor Calibration Procedure; Co2 Sensor Calibration Procedure - Teledyne T300 Operation Manual

Teledyne API – Model T300/T300M CO Analyzer

3.4.4.3. O2 SENSOR CALIBRATION PROCEDURE

3.4.4.4. CO2 SENSOR CALIBRATION PROCEDURE

Note
06864B DCN6314
If your T300/T300M is equipped with the optional O
calibrated during installation of the instrument. See Section 9.7.1 for instructions.
If your T300/T300M is equipped with the optional CO
calibrated during installation of the instrument. See Section 9.7.2 for instructions.
Once you have completed the above set-up procedures, please fill out
the Quality Questionnaire that was shipped with your unit and return it
to Teledyne API. This information is vital to our efforts in continuously
improving our service and our products. THANK YOU.
Getting Started
sensor, this sensor should be
2
sensor, this sensor should be
2
85