Teledyne API – Model T300/T300M CO Analyzer
These buttons
set the signal
level and type
of the selected
channel.
06864B DCN6314
To change the output type and range, select the ANALOG I/O CONFIGURATION
submenu from the DIAG Menu (see Figure 5-3) then press:
From the
AIO CONFIGURATION SUBMENU
DIAG
ANALOG I/O CONFIGURATION
PREV NEXT
DIAG AIO
AOUTS CALIBRATED: NO
SET>
CAL
Continue pressing SET> until you reach the
output to be configured
DIAG AIO
CONC_OUT_2: 5V, OVR, NOCAL
<SET SET>
EDIT
DIAG AIO
CONC_OUT_2 RANGE: 5V
<SET SET>
EDIT
DIAG AIO
CONC_OUT_2: RANGE: 5V
0.1V
1V
5V
10V CURR
ENTR
EXIT
EXIT
EXIT
EXIT
ENTR EXIT
Setup Menu
Pressing ENTR records
the new setting and
returns to the previous
menu.
Pressing EXIT ignores the
new setting and returns to
the previous menu.
123